Parmco 600mm In-Wall Downdraft
The In-Wall Airbox is fitted into the wall cavity behind the cooktop. The grill and grill surround are attached to the front of the unit, giving it a flush fit on the wall. It can be mounted with the air outlet pointing sideways or straight down.
- Available in Black and Stainless Steel.
- This downdraft unit can be up-spec'd from the P1 motor (750m3/h) to a P1-9 (1000m3/h) motor. There is a difference in dimensions for the motors and Mega ducting sizes required for this motor mean that you need a 90mm cavity or 97mm cavity to duct through if there are to be joins in the ducting. This upgrade is available on the 600mm in wall airbox and the 600mm in-bench and 600mm side and rear risers.
- The In-Wall Downdraft can have motors mounted remotely from the airbox. If using the P1 motor, a mounting plate will be required (ordered seperately).
- For full installation instructions and options please refer to the brochure or the operating manual.
This kit comprises of the following parts: -
P1 - Downdraft motor
P2WALL - In-wall air box
PSG-IW-SS - stainless steel surround and grill surround kit. A black grill and surround can be ordered as an option.
Note that ducting will be required but is not provided. Select the parts you need from here.